Home Contact Us Site Map
About Us Our Products HVAC Education Controls Education News & Events Jobs & Career
Actuators
MCS Chiller Controls
Hanbell Screw Compressors
Motorised Control Valves
HVAC Sensors
Motor Protctors
Coil Coatings
Energy Saving Services
Switches & Transmitters
Accessories
 
 

MCS Chiller Controls

 
MCS-MAGNUM :
Master micro controller board with twelve 0-5vdc sensor inputs, four 0vdc or 5vdc digital inputs, ten 230vac 6.3amp relay outputs, four 0-10vdc analog outputs, keypad, 128 x 64 dot pixel STN monochrome graphics LCD with 2.8" diagonal viewing area, real time clock, MCS-I/O, RS-232, RS-485 and Ethernet communication ports.  User selectable 115 or 230vac operation.
 
MCS-MAGNUM-OEM Magnum with OEM mounted Keypad / LCD assembly
MCS-MAGNUM-PANL Magnum with Panel mounted Keypad / LCD assembly
MCS-MAGNUM-DOOR Magnum with Door mounted Keypad / LCD assembly
MCS-MAGNUM-N Magnum (Board only)
 
Options available for the MCS-MAGNUM micro controller. Add these extensions to the end of the part number for a MCS-MAGNUM assembly listed above.
-24 24vac input power
 
MCS-8 :
Master micro controller board with eight 0-5vdc sensor inputs, eight 115vac 10amp relay outputs, one 0-10vdc / 4-20ma analog output, keypad, 16 character x 2 line large character backlit display, real time clock, MCS-I/O, RS-232 and RS-485 communication ports.
 
MCS-8-B-BLCD MCS-8 in Box Enclosure
MCS-8-B-REMOTE MCS-8 in Box Enclosure for Remote Keypad Access
MCS-8-D-BLCD MCS-8 Door Panel Package
MCS-8-P-BLCD MCS-8 Inside Control Panel Mounting Package
MCS-8-N MCS-8 (Board only)
 
Options available for the MCS-8 micro controller. Add these extensions to the end of the part number for a MCS-8 assembly listed above.
-24 24vac input power
-230 230vac input power
 
MCS-8 Control Cabinets :
Master micro controller board with eight 0-5vdc sensor inputs, eight 115vac 10amp relay outputs, one 0-10vdc / 4-20ma analog output, keypad, 16 character x 2 line large character backlit display, real time clock, MCS-I/O, RS-232 and RS-485 communication ports.
MCS-8-MB-CH MCS-8 in Box Enclosure 20"w x 24"h x 6"d
MCS-8-LB-CH MCS-8 in Box Enclosure 27"w x 32"h x 6"d
Options available for the MCS-8 Control Cabinets listed above. Factory installed at MCS. When ordering, please list these as separate part numbers.
 
-MB-485-GATEWAY RS-232 to RS-485 communications bridge
-MB-EMERG-SW Emergency stop switch
--MB-ETHERNET RS-232 to Ethernet device server with 100-240vac power adapter
-MB-I/O-N MCS-I/O-N board
-MB-MCS-24-VOLT 120vac to 24vac stepdown transformer
-MB-MCS-SE-IB6 Temperature control board for Sporlan expansion valves
-MB-MODEM MODEM
-MB-RO8 MCS-RO8
-MB-RUN-SW Run / Stop switch
-MB-SI16 MCS-SI16
 
MCS-I/O :
Slave micro controller expansion board for an MCS-8 with eight 0-5vdc sensor inputs, eight 115vac 10amp relay outputs, one 0-10vdc / 4-20ma analog output, MCS-I/O and RS-485 communication ports, no keypad or display.
 
MCS-I/O-B MCS-I/O in Box Enclosure
MCS-I/O-P MCS-I/O Inside Control Panel Mounting Package
MCS-I/O-N MCS-I/O (Board only)
 
Options available for the MCS-I/O micro controller.  Add these extensions to the end of the part number for a MCS-I/O assembly listed above.
-24 24vac input power 
-230 230vac input power 
 
MCS-SI16 :
Slave micro controller expansion board for an MCS-8 with sixteen 0-5vdc sensor inputs, MCS-I/O and RS-485 communication ports, no keypad or display.
 
MCS-SI16 MCS-SI16 (Board only), mounts with four #6 sheet metal screws and comes with a Lexan cover
MCS-SI16-B MCS-SI16 mounted in Box Enclosure
 
Options available for the MCS-SI16 micro controller.  Add these extensions to the end of the part number for a MCS-SI16 assembly listed above.
-24 24vac input power
-230 230vac input power
 
MCS-RO8 :
Slave micro controller expansion board for an MCS-8 with eight 0-5vdc sensor inputs, eight 115vac 5amp relay outputs, MCS-I/O and RS-485 communication ports, no keypad or display.
MCS-RO8 MCS-RO8 (Board only), mounts with four #6 sheet metal screws and comes with a Lexan cover
Options available for the MCS-RO8 micro controller. Add these extensions to the end of the part number for an MCS-RO8 assembly listed above.
-24 24vac input power
-230 230vac input power
-SSM Relay Outputs 7 & 8 modified for use with an MCS-SOLIDSTATE
 
MCS-6 :
A stand-alone unitary micro controller with eight 0-5vdc sensor inputs, six 24vac 5amp relay outputs with LED status indicators, one 0-10vdc analog output, two RS-485 communication ports, eight alarm LEDs, no keypad or display.  Board mounts with four #6 sheet metal screws and comes with a Lexan cover.
MCS-6 MCS-6 (Board only)
Software Options available for the MCS-6.  Add these extensions to the end of the part number for a MCS-6 assembly listed above.
-CND Software for the efficient control of condenser fans
-HCU Software for humidity control units for dehumidification
-HP Software for controlling heat pumps
 
MAGNUM-DEMO :
MAGNUM micro controller board with twelve 0-5vdc sensor inputs, four 0vdc or 5vdc digital inputs, ten 230vac 6.3amp relay outputs, four 0-10vdc analog outputs, keypad, 128 x 64 dot pixel STN monochrome graphics LCD with 2.8" diagonal viewing area, real time clock, MCS-I/O, RS-232, RS-485 and Ethernet communication ports.  Mounted to a backplane and attached to a stand along with a keypad and display.  User selectable 115 or 230vac operation.


MAGNUM-DEMO
 
MAGNUM-DEMOCASE :
MAGNUM micro controller board with twelve 0-5vdc sensor inputs, four 0vdc or 5vdc digital inputs, ten 230vac 6.3amp relay outputs, four 0-10vdc analog outputs, keypad, 128 x 64 dot pixel STN monochrome graphics LCD with 2.8" diagonal viewing area, real time clock, MCS-I/O, RS-232, RS-485 and Ethernet communication ports.  Mounted inside a rugged aluminum briefcase and incorporating indicator lights, switches and variable potentiometers that allows the user to easily simulate a wide variety of conditions and visually see what is happening as if it was controlling an actual unit.  User selectable 115 or 230vac operation.

MAGNUM-DEMOCASE
 
MCS-8-DEMO :
MCS-8 master micro controller with eight potentiometer-controlled 0-5vdc sensor inputs, eight 115vac 10amp relay outputs with LED status lights, one 0-10vdc / 4-20ma analog output, keypad, 16 character x 2 line large character backlit display, real time clock, MCS-I/O, RS-232 and RS-485 communication ports.  Includes cable (specify MCS-PC25 or MCS-PC9) for MCS-8 to PC communication.  User selectable 115vac or 230vac operation.
MCS-8-DEMO Panel Mount
 
MCS-I/O-DEMO :
MCS-I/O slave micro controller expansion board with eight potentiometer-controlled 0-5vdc sensor inputs, eight 115vac 10amp relay outputs with LED status lights, one 0-10vdc / 4-20ma analog output, MCS-I/O and RS-485 communication ports.  User selectable 115 or 230vac operation.
MCS-I/O-DEMO Panel Mount
 
MCS-6-DEMO :
Unitary stand-alone MCS-6 micro controller with socketed microprocessor, eight potentiometer-controlled 0-5vdc sensor inputs, six 24vac 5amp relay outputs with LED status indicators, one 0-10vdc analog output, two RS-485 communication ports, eight alarm LEDs, no keypad or display.  Also includes an MCS-STAT-HUMD, MCS-485-GATEWAY and cable (specify MCS-PC25 or MCS-PC9) for PC communications.
MCS-6-DEMO Panel Mount
 
Back
 
© Copyright 2007, UNICOM. All rights reserved. Site Designed & Maintained by Aakrutee